德國寶得振動式極限狀態液位開關說明書

德國寶得振動式極限狀態液位開關說明書

上海乾拓貿易有限公司

電話：021-39526589-8004

手機：17321056802 (微信)

郵箱：17321056802@163.com

企業QQ：2880626084

聯系人：楊江玲

地址：上海嘉定區嘉涌路99弄6號樓713室

Turn-on voltage Max. 34 V DC Blocking current <10 μA Mode Min./max changeover by electrical connection Max.:

 overfill protection - Min.: dry run protection LED indication: green and red

它也可以在惡劣的測量條件下工作，

 0.5 W Load current Max. 250 mA (output - overload and permanently short circuit proof) Voltage loss Max. 3 V DC 

such as turbulences, air bubbles, foam generation, buildup or varying products.

其設計適合工業中所有的工藝技術領域，可在液體中使用。

典型用途是防止溢流或干運轉。

小型振叉（40 mm 長）可應用于容器、儲罐或管件中。

 Medium pressure -1...64 bar Accuracy Hysteresis Delay time / Frequency Approx. 2 mm with vertical installation Approx. 

500 ms / Approx. 1200 Hz Output Transistor output PNP or contactless electronic switch

Electrical data - Sensor with PNP transistor output Power supply / power consumption 10...35 V DC / max.

General data Materials Tuning fork and fitting Process seal / Housing 

Stainless steel 316L (1.4435) Klingersil? C 4400/ Stainless steel 316L and plastic PEI Weight Approx. 250 g Electrical connections 

Cable plug acc. to EN 175301-803 or M12 x 1 male fixed connector Process fitting Thread G or NPT, 1/2”, 3/4” or 1”;

 clamp 2” Surface finishing quality Ra < 3.2 ?m (thread) / Ra < 0.8 ?m (Clamp) Dynamic viscosity /

 Density 0.1...10000 mPa.s / 0.7...2.5 g/cm3 Medium temperature -40...+100°C (150°C for Clamp process connection)

比如渦流、氣泡、泡沫形成、粘附、外部振動或變換的填充物。

一般應用領域，比如極限狀態采集或防止干運轉

安裝時不需設置

Typical applications are overfill or dry run protection. 

The small tuning fork (40 mm of length) allows the use in vessels, tanks and pipes.

Due to the simple and rugged measuring system, the 8110 is virtually unaffected by the chemical 

and physical features of the liquid. It works even under unfavourable conditions 

型號 8110 是一種用于液體的液位開關，帶有一個作為傳感器元件的振叉。

小設計尺寸

  For universal use as overfill or dry run protection system

 ?  Setup without adjustment ?  Smallest mounting dimensions

Electrical data - Sensor with contactless electronic switch output Power supply 20...253 V AC, 50/60 Hz or 20...253 V DC

 Domestic current requirement Approx. 3 mA (via the load circuit) (Not with PLC) Load current Min. 10 mA - Max. 250 mA 

Mode Min./max changeover by electrical connection Max.: overfill protection - Min.: dry run protection

8110 具有一個簡單、耐用的測量系統，

在使用時，幾乎不受液體化學和物理特性的影響。

The 8110 is a vibrating level switch for liquids, using a tuning fork for level detection.

It is designed for industrial use in areas of process technology and can be used in liquids. 

德國寶得振動式極限狀態液位開關說明書